Quick Rip, Quick Skew, and Quick Chop

Scroll to see some of the saw systems we offer and let us know if you don't see what you're looking for.

Your form message has been successfully sent.

You have entered the following data:

Contact form

Please correct your input in the following fields:
Error while sending the form. Please try again later.

Note: Fields marked with * are required

Please be aware that the contents of this form are not encrypted

Rip Saws

Scroll Down For More Options

The Rip One By Cameron

The Cameron Automation Rip-One is a complete lumber scanning, optimization, and gang ripping work cell designed for smaller shops. It increases productivity dramatically by transforming gang ripping into a single person operation. This is achieved by incorporating an inexpensive but extremely powerful high resolution 3D scanning system.

Opti-Rip By Cameron

Cameron Automation's Largest Infeed for the High Production Lumber Mills and Large Woodworking Factories.

Adaptable to many Material Handling Systems
(1) Operator Runs Whole Process from Bundle Dumper through to Rip Saw
Same Industry Leading Features of the Cameron Quick Rip for High Yield and Accuracy
Compatible with all 24" & 40" Fixed saws, and most Moving Arbor Saws on the Market

Quick Rip By Cameron

The Quick Rip is a complete Rip Saw Optimization Infeed in a simple and compact package with virtually the same footprint as an operator hand feeding with a stack of lumber.

Innovative Fenceless Design allows for the Industries most Accurate Infeed
Auto-Skew Feature Improves Yields 2-3% Over the Competition
Compatible with All Fixed Blade and most of the Moving Arbor Saws

The Skew By Cameron

With an unbelievably low price, The Cameron Skew opens our product line to owners of every gang rip saw. The Skew offers features of a much more expensive system, in an inexpensive and compact machine.

Improve Safety by Removing the Operator from the Kick-back Danger Zone
Lumber savings by increasing yields 7-10% over Hand Feeding
Improved Data Collection with Fully Integrated Rip Software

Chop Saw

Please Contact Us For More Options

Quick Chop By Cameron

The Quick Chop is a complete and affordable push feed chop saw optimization system.

1. Using a luminescent crayon, the operator marks a board for defects and places the board on the stops. These crayon marks will not appear on the cut board.

2. With the push of a button the chop saw operator can select which cutting bill to use on the board. Unlike the slow 'paddle' measuring/defecting technique, the operator does not have to walk from one end of the board to the other to determine the board's length.

3. The servo controlled pusher/scanner then scans the board for length and the location of the crayon marks. The board is then dropped in front of the pusher/scanner and it is fed into the saw and cut at the optimum positions based on the data collected.

As the board is being cut, the operator can mark the next board, place it on the stops and select the next cutting bill, so that it can be scanned immediately the instant the previous board is finished.

Three stages of operation provide for a faster production rate.



Connect with Quis:

Quis Machinery Inc.

P.O. Box 15227

Asheville, NC 28813


Phone: 828-490-7716

Email: Office@quismachinery.com









Print Print | Sitemap
© Jason Dingess