Used Weinig jointer pre-setting & measuring stand. 

For 2-1/8″ arbor tooling.

Price…………FOB: Aberdeen, NC……………………………………….$550.00

• Quantity (2)   Tool #114595 with (3) carbide profiled knives each
• Quantity (2)   Tool #114596 with (3) carbide profiled knives each
• Quantity (2)   Tool #114597 with (3) carbide profiled knives each

Profiled knives are standard tooling available through Gladu Tooling.

Technical drawings available via e-mail or fax.

PRICE……………………..FOB: Aberdeen, NC……………………………$290.00 each

www.quismachinery.com

Used ACCU-SYSTEMS Model DS-1 Handheld Dowel Inserter

• Serial Number: 007-94
• Has New Gun, Glue Pot, and Regulator

FEATURES:  Dowel reject slide; One button glue flush system; Micro-processor;  4 large casters; 18″ cast aluminum dowel hopper; 2-1/2 gallon glue/water tank; Inserts up to 100 dowels per minute; Double hit

SPECIFICATIONS:  Dowel diameter – 1/4″ – 1/2″; Dowel length – 1″ – 2″; Power required – 110 VAC; Air required – 80 -100 PSI; Glue capacity – 1 gallon; Water capacity – 1 gallon; Bowl capacity – 3000 (approx); Operation speed – 100 per minute; Gun weight – 3.5 lbs; Machine weight – 275 lbs; Dimensions – 24x29x40  (specifications subject to change without notice); “As Is, Where Is”

PRICE……….FOB: Greenville, SC……………………………………………………………………..$3,250.00

One (1) Used Holz-Her Sprint 1317-2 Edgebander, SN: 1328 (2004-yr of mfg.)

• 1961 Pre-Milling Station w/Diamond Cutters
• 1903 Auto Magazine
• 1906-M Glue Station – Automatic
• 1913-P Pneumatic Pressure Section (3 rollers)
• 1918  HF End Trim
• 1942-M HF Flush Trim
• 1929 Scraper
• 1832 Corner Rounding Unit
• 1940 Buffer
• Pneumatic Changeover System (PCS) Included For:
•         1918 HF End Trim Unit
•         1942-M HF Flush Trim
•         1929 Scraping Unit
• Adjustable Outboard Support
• 8 MM Edgebanding Capacity
• Motorized Beam (Servo)
• Variable Speed Track 8-18 MPM
• Manuals
• Spare Part: New Feed Track Chain

PRICE……….FOB: Aberdeen, NC………………………………………………..$ 32,500.00

Contact: frankquis@gmail.com

Used Weinig Unimat 23 6-head Feed Thru Moulder, SN: 023-1356  (1995)

• Working width (at cutting circle dia. 5-1/2 in.) 3/4 in. to 9-1/16 in.
• Working height (at cutting circle dia. 5 in.) 5/16 in. to 6-5/16 in.
• 74″ x 10″ long infeed table with fence

Head sequence:

• Feed motor 10hp, 460 Volts, 3 Ph, 60 Hz
• 1st Bottom: 15 hp
• 2nd Right Side: 15hp
• 3rd Left Side: 15hp
• 4th Top: 20hp
• 5th Top: 25hp
• 6th Bottom: 20hp
• Preparation for later attachment of universal spindle
• Mechanical digital set-up on all heads
• Variable speed feed – 0-120 ft/min
• All spindles are 8,000 rpm except for 1st bottom spindle which is 6,000 rpm
• All spindles are 1-13/16 in. diameter
• (3) power rollers in table
• Sound enclosure
• Duct Hood

PRICE………FOB:  Mebane, NC…………………………………………………….$37,500.00

DELIVERY:    One Week

TERMS:           Payment prior to shipment

Inspection of this machine is invited.  Please contact Frank Quis at frankquis@gmail.com

Used Fletcher Machine Single End Shaper, SN: 02220s-1.   12″ wide fixed feedchains;  7-1/2 HP tilt jump shaper head with stack tooling spindle 7″ and automatic up/down positioning for three profiles;  One column;  7-1/2 HP tilt shaper head with stack tooling spindle 7″ and automatic up/down positioning for three profiles;  Outboard stock support

Price………FOB: Aberdeen, NC………………………………………………………………………..$32,000.00

http://youtu.be/9viT_bd02FA

Used Sicotte Model 750L-8 Horizontal Boring Machine

•   Serial Number:        1492 
•   Motor:                         (4) 2 HP, 220/440/3/60
•                                       belt driven
•                                       adjustable on 2 axes
•   Table:                         8″ W x 96″ L
•   Boring area:              2-1/4″ x 96″
•   Spindle Beam:          Flat surface with key
•                                        Up to 6″ stroke 
•                                        Air/oil operated
•                                        Variable speed feed
•   Spindles:                    Single or cluster
•                                        Minimum center with single spindle 2″ 
•                                        Cluster center 32 mm
•                                        Speed 3600 RPM
•    Operation:                 Single stroke
•    Hold down clamps: (4) Air operated
•    Guards included
•     “As is, Where is”

 PRICE……………FOB: Eastern NC………………………………$7,900.00

• Single Head: Combi head with 5.5″ contact roll and finishing pad
• Working width: 43
• Workpiece thickness min. max: 1/8″ x 5″
• Abrasive belt width x length: 43″ x 75″
• Main motor HP: 25
• Dust ports: 7″ 1200 cfm
• Air consumption per cycle @ 100psi: 2 cfm
• Amps (full load) 74
• Photoelectric belt tracking
• Soft Start motor starters
• Large diameter idle and tension rollers
• 2.8″ diameter hold down rolls
• Control:
• PLC Control with digital readout
• Automatic thickness set up
• Mororized thickness
• Conveyor:
• Mechanical Variable Speed
• Conveyor belt centering
• 4 – 5 ton ball type lifting screws
• Opening Height: .250″ to 4.5″
• No electrical lock out switch
• 2.0″ wide Pad
• Color: White/Grey

PRICE  FOB.. Aberdeen, NC…………………………………………………..$19,500.00

Delivery:  One Week

Terms:  Payment prior to shipment

Unique model 320 door and drawer shaper/sander.  Also profiles and sands raised panel doors.  SN: 061495160 (1995), 230 V/3 Ph/60 Cy, Good condition

• (2) Shaper heads: 1-1/4″ x 5″ High with 7.5 HP motors; (2) Sander Heads: 1″ x 5″ High with 3 HP motors
• Variable speed conveyor feeds material through the machine – Adjustable “quick change” fence for rapid steups of door/drawer size
• Complete with: (1) 5″ and (1) 4″ Dust collection port

PRICE  F.O.B. Aberdeen, NC……………………………………………………………..$5,900.00

Delivery – Late February 2011

Terms: Payment prior to shipment

Other photos of Model 320:

Open literature below.

20110106_165202_0791

20110106_165220_0792

For Parts, “As Is, Where Is”

1995, 230/3/60, scraper and buffing; needs new chain

Crating extra

PRICE…………………………………………………$2,500.00

FOB:  Aberdeen, NC

Terms:  Cash prior to shipping